iHealth Fingertip Pulse Oximeter (Not a wireless model)

iHealth Fingertip Pulse Oximeter

Measuring Oxygen Level (SpO2) and Heart Rate ( pulse)

(*Not a wireless model)

The iHealth fingertip pulse oximeter offers an affordable, reliable and precise way to check your pulse rate and blood oxygen saturation levels – whenever, and wherever. The Pulse Oximeter features a one-button operation to determine your blood oxygen saturation levels ( SpO2) as well as your heart rate (pulse).



Display Format: LCD Display
SpO2 Measuring Range: 0% ~ 100%
Pulse Rate Measuring Range: 30 bpm ~ 250 bpm
Pulse Wave Display: columniation display and the waveform display.
Power Requirement: 2x 1.5 V AAA Alkaline battery ( or using the rechargeable battery instead), adaptable range: 2.6 V – 3.6V
Power Consumption: Smaller than 30 mA
Resolution: 1% for SpO2 and 1 bpm for Pulse Rate.
Measurement Accuracy: ±2% in a stage of 70%-100% SpO2, and meaningless when the stage being smaller than 70% ±2 bpm during the pulse rate range of 30-99 bpm and ±2% during the pulse rate range of 100~250 bpm. Clinical Trial: SpO2 regression plot & Bland-Altman plot, Refer to Figure 2 & Figure 3.
Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when the pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm during the pulse rate range of 30~99 bpm and ±2% during the pulse rate range of 100~250 bpm.
Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and darkroom is less than 1%.
It’s equipped with a function switch: The product will enter the standby mode when no signal is in the product within 5 seconds.

Optical Sensor:
Red light ( wavelength is 660 nm, 6.65 mW)
Infrared (wavelength is 880 nm, 6.75 mW)

SKU#SPO2 MODEL#CMS50DA

*Some iHealth fingertip pulse oximeter may arrive without the iHealth logo on the package but with Andon logo. This is still an iHealth fingertip pulse oximeter but we have removed the step for printing the new package to improve production speed due to the high demand during this crisis. All other components are the same. It’s the same model.